SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1983CITATION 2D HATCHBACK, 2.8 Z, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)SUSPENSIONWHEEL ALIGNMENTWHEEL ALIGNMENT SPECIFICATIONS & PROCEDURESALIGNMENT SPECIFICATIONS
1983 Chevrolet Citation 2D Hatchback, 2.8 Z, Automatic

Alignment Specifications

1983 Chevrolet Citation 2D Hatchback, 2.8 Z, AutomaticSECTION Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS (SKYLARK)

Application Specification
Caster (Degrees) 2.0 +/- 1.0
Camber (Degrees) 0 +/- 1/2
Toe-in (Inches) 0 +/- 1/8
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
WHEEL ALIGNMENT SPECIFICATIONS (CITATION)

Application Specification
Caster (Degrees) 2 +/- 1
Camber (Degrees) 0 +/- 1/2
Toe-in (Inches) 0 +/- 3/32
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
WHEEL ALIGNMENT SPECIFICATIONS (OMEGA)

Application Specification
Caster (Degrees) 1 +/- 3
Camber (Degrees) 0 +/- 1/2
Toe-in (Inches) 0 +/- 3/32
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
WHEEL ALIGNMENT SPECIFICATIONS (PHOENIX)

Application Specification
Caster (Degrees) (1)
Camber (Degrees) 0 +/- 1/2
Toe-in (Inches) (2) 0 +/- 1/8
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
(1) Non-adjustable.
(2) Maximum side-to-side difference 1/2°.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.