Replacement (Camaro & Firebird)

1983 Chevrolet Citation 2D Hatchback, 2.8 X, AutomaticSECTION Replacement (Camaro & Firebird)
  1. Drain cooling system. Remove heater hoses from heater core. Remove right-hand lower hush panel and right-hand lower trim of instrument panel. Remove lower right-hand instrument carrier-to-cowl screw.
  2. Remove 4 heater case cover screws. See Fig 1 . Upper left-hand screw is reached, using a long socket extension through panel opening. Lift corner of instrument panel slightly to align socket. Remove heater case cover.
  3. Remove core support plate and baffle screws. Remove heater core, support plate, and baffle. To install, reverse removal procedure. Seal any air leaks, and check for coolant leakage.
Fig 1: Heater Case and Core Assembly Camaro and Firebird models are illustrated.
G17713
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.