Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1982CAB & CHASSIS S10, AUTOMATIC TRANSREPAIR AND DIAGNOSISQUICK LOOKUPSCOMMON SPECS & PROCEDURESENGINE COOLING SYSTEMSSPECIFICATIONS
1982 Chevrolet Cab & Chassis S10, Automatic Trans
Engine Cooling Systems: Specifications
1982 Chevrolet Cab & Chassis S10, Automatic TransSECTION Specifications
PRESSURE CAP
| Application | psi (kg/cm2 ) |
|---|---|
| All Models | 15 (1) |
THERMOSTAT
| Application | Rating °F (°C) |
|---|---|
| All Thermostats | 195 (91) |
COOLING CAPACITIES
| Application | Quarts (Liters) | |
|---|---|---|
| 1.9L 4-Cyl. | ||
| All Models | 9.4 (8.9) | |
| 2.8L V6 | ||
| All Models | 12.0 (11.4) | |
| 4.1L 6-Cyl. | ||
| Van Models | 17.0 (16.1) | |
| All Other Models | 15.5 (14.7) | |
| 4.8L 6-Cyl. | ||
| "P" Models | 13.5 (12.8) | |
| All Other Models | 15.5 (14.7) | |
| 5.0 & 5.7L V8 | ||
| With A/C | 18.0 (17.1) | |
| Without A/C | 17.5 (16.6) | |
| 6.2L V8 Diesel | ||
| With A/C | 24.5 (23.3) | |
| Without A/C | 23.0 (21.7) | |
| 7.4L V8 | ||
| With A/C | 24.5 (23.3) | |
| Without A/C | 23.0 (21.7) | |
TIGHTENING SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Water Pump Attaching Bolts | ||
| All Models | 15 (20) | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.