Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine Oiling System
Trochoid type oil pump is designed to deliver 4.75 gallons of oil per minute through the engine at a pump speed of 1400 RPM. At normal operating temperature, using 30 SAE oil, temperature will be 122°F. Lubricating system is designed to deliver oil at a rate of 57 psi.
Crankcase Capacity - 4.2 quarts.
Oil Filter - Full-flow disposable canister type.
Normal Oil Pressure - 57 psi.
Relief Valve - Located on side of cylinder block near oil filter. Opening pressure of relief valve is 61-67 psi.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.