Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1971CHEVELLE BASE, 2D CONVERTIBLE, 5.0L ENG, ENG CD CCC, AUTOMATIC TRANS, TRANS MFR CD POWERGLIDEREPAIR AND DIAGNOSIS (SINGLE PAGE)SUSPENSIONFRONT SUSPENSIONFRONT SUSPENSION CHEVROLET & CAMAROREMOVAL & INSTALLATIONLOWER CONTROL ARMCONTROL ARM BUSHINGS
1971 Chevrolet Chevelle Base, 2D Convertible, 5.0L Eng, Eng CD CCC, Automatic Trans, Trans Mfr CD Powerglide
Control Arm Bushings
1971 Chevrolet Chevelle Base, 2D Convertible, 5.0L Eng, Eng CD CCC, Automatic Trans, Trans Mfr CD PowerglideSECTION Control Arm Bushings
Upper and lower control arm bushings may be replaced using suitable tools and an arbor press. Be sure not to collapse control arm legs. On upper control arm, cross shaft must be installed so that it can be turned by hand.
NOTE:
After installing bushing in control arm, bushing must be flared using tool J-23915 before installing control arm on chassis.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.