Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1971CHEVELLE BASE, 2D CONVERTIBLE, 5.0L ENG, ENG CD CCC, AUTOMATIC TRANS, TRANS MFR CD POWERGLIDEREPAIR AND DIAGNOSIS (SINGLE PAGE)GENERAL INFORMATIONDRIVELINE/AXLESMAP - DRIVE TRAIN & TRANSMISSIONDRIVETRAIN AND TRANSMISSIONDRIVE SHAFT FLANGES
1971 Chevrolet Chevelle Base, 2D Convertible, 5.0L Eng, Eng CD CCC, Automatic Trans, Trans Mfr CD Powerglide
Drive Shaft Flanges
1971 Chevrolet Chevelle Base, 2D Convertible, 5.0L Eng, Eng CD CCC, Automatic Trans, Trans Mfr CD PowerglideSECTION Drive Shaft Flanges
| Condition | Code | Procedure |
|---|---|---|
| Bearing cap bore distorted | A | Require repair or replacement |
| Bent, affecting performance | A | Require replacement |
| Bolt holes elongated | A | Require repair or replacement |
| Bushing or seal surface worn, affecting performance | A | Require repair or replacement |
| Leaking through soft yoke plug | A | Require repair or replacement of soft yoke plug |
| Retainer strap bent | A | Require replacement of retainer strap |
| Slip yoke broken | A | Require replacement |
| Splines worn close to the end of their useful life | 1 | Suggest replacement |
| Splines worn, affecting performance | A | Require replacement |
| Threads damaged | A | Require repair or replacement |
| Threads stripped (threads missing) | A | Require replacement |
| U-bolt damaged, affecting performance | A | Require replacement of U-bolts |
| Yoke damaged, affecting performance | A | Require repair or replacement |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.