Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Fuel Vapor Storage Canister
The canister is located in the engine compartment of the vehicle and contains approximately 1 1/2 lbs. of activated charcoal. During periods of vehicle in-operation, vapors coming off fuel tank are absorbed and stored in the charcoal. When the engine is started, stored vapors are drawn off the carbon by fresh air entering the bottom of the canister. Any vapors coming off the fuel tank during vehicle operation by pass the carbon bed and are inducted directly into the engine via the idle purge restrictor.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.