SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1967K20 PANEL 4.6L ENGREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCETUNE-UPDISTRIBUTOR SPECIFICATIONSCHRYSLER DISTRIBUTOR ADVANCE SPECIFICATIONS
1967 Chevrolet K20 Panel 4.6L Eng

CHRYSLER Distributor Advance Specifications

1967 Chevrolet K20 Panel 4.6L EngSECTION CHRYSLER Distributor Advance Specifications
NOTE: FOR ENGINE RPM AND DEGREES, MULTIPLY SPECIFICATIONS BELOW BY 2.
Distributor Part No. Rot. (1) Automatic Advance (Distr. Degrees & RPM) Vacuum Advance (Distr. Degrees & Inches of Hg.)
Deg. RPM Deg. RPM Deg. RPM Deg. RPM Deg. In.Hg. Deg. In.Hg. Deg. In.Hg.
2444104 C 0 375-525 0-2.5 525 8-10 1010 12.5-14.5 2200 0 4.5-7.5 4-7 8.9 7-10 10.5
2444118 C 0 325-475 0-4.5 475 6.75-8.75 700 12.5-14.5 2200 0 5-7.1 3-6 8.5 6-8.5 10.0
2444648 C 0 325-475 0-2.5 475 7.5-9.5 960 10.5-12.5 2200 0 4.9-7.1 3-5 10.5 5.25-7.5 13.0
2444759 C 0 325-475 0-2.5 475 7.5-9.5 960 10.5-12.5 2200 0 4.9-7.1 3-5 10.5 5.25-7.5 13.0
2444760 C 0 320-480 0-2 480 4.5-6.5 850 10.5-12.5 2300 0 8-10 5-8 13 9-12 16.0
2444761 C 0 330-570 0-2 570 2-4 800 8-10 2300 0 8-10 5-8 13 9-12 16.0
2444907 C 0 325-475 0-2.5 475 7.5-9.5 960 10.5-12.5 2200 0 6.9-9.1 3-5 12.5 5.25-7.5 15.0
2444908 C 0 325-475 0-2.5 475 7.5-9.5 960 10.5-12.5 2200 0 6.9-9.1 3-5 12.5 5.25-7.5 15.0
2642234 C 0 300-450 0-2.5 450 7.5-9.5 870 10.5-12.5 1750 0 5-8 5-8 10 10.5-13.5 13.5
2642238 C 0 325-475 0-2 475 5-7 830 8-10 1750 0 5-8 5-8 10 10.5-13.5 13.5
2642242(2) C 0 325-475 0-3 475 5-7 725 8-10 1800 0 5-8 5-8 10 8.5-11.5 12.0
2642248 CC 0 310-490 0-2 490 3-5 750 7-9 2400 0 6-9 4.5-7.5 12 8.25-11 15.0
2642358 (3) C 0 350-500 0-6.5 500 12-14 780 15.5-17.5 2000 0 5-8 5-8 10 8.5-11.5 12.0
2642482 (4) CC 0 425-575 0-3.5 575 3.75-5.75 740 7.5-9.5 1400 0 6-9 4.5-7.5 12 8.25-11 15.0
2642718 C 0 320-480 0-1 480 3-4.25 1000 10.5-12.5 2350 0 7-9 6-9 12 10.5-13.5 15.0
2642721 C 0 325-475 0-2 475 3.75-5.75 780 12.5-14.5 2250 0 7-9 6-9 12 10.5-13.5 15.0
2642724 C 0 325-475 0-5 475 7.75-9.75 600 18-20 2350 0 7.5-10.5 7-10 14 10.5-13.5 16.0
2642727 CC 0 250-450 0-2 450 2.5-4.5 700 10.5-12.5 2150 0 5-8 5-8 10 10.5-13.5 13.5
2642730 CC 0 310-490 0-2 490 3.5-5.5 800 8.5-10.5 2300 0 8-10 5-8 13 9-12 16.0
2642745 CC 0 425-575 0-4.5 575 6-8 790 10.5-12.5 2450 0 4.5-8 6-9 12 11.5-14.5 16.5
2642748 CC 0 325-475 0-4 475 4.5-6.5 640 8.5-10.5 2200 0 8-10 5-8 13 9-12 16.0
2642755 C 0 325-475 0-4.5 475 6.75-8.75 700 12.5-14.5 2200 0 5-7.1 3-6 8.5 6-8.5 10.0
2642758 C 0 375-525 0-2.5 525 8-10 1010 12.5-14.5 2200 0 4.5-7.5 4-7 8.9 7-10 10.5
2642786 C 0 350-500 0-3.7 500 12.2-14.2 990 17-19 2200 0 5-7.1 4-7 9.2 8.5-11.5 12.0
2642789 C 0 325-475 0-6 475 11.2-13.2 750 17-19 2200 0 5-7.1 3-9 8.5 6-8.5 10.0
2642792 C 0 350-500 0-3 500 9-11 925 12.5-14.5 2400 0 6.9-9.1 3-5 12.5 6.5-8.5 16.2
2642795 C 0 325-475 0-4.5 475 8-10 750 12.5-14.5 2400 0 5-7.1 3-6 8.5 6-8.5 10.0
2642805 C 0 350-500 0-7 500 11.25-13.25 735 15.5-17.5 1900 0 5-8 5-8 10 10.5-13.5 13.5
2642810 CC 0 400-550 0-4 550 5.5-7.5 750 14.5-16.5 2200 0 4.5-8 6-9 12 11.5-14.5 16.5
2642813 CC 0 350-500 0-5 500 8.2-10.2 750 14.5-16.5 2300 0 8-10 5-8 13 11.5-14.5 17.5
2642816 CC 0 425-575 0-3.5 575 6.2-8.2 840 12.5-14.5 2400 0 8-10 5-8 13 11.5-14.5 17.5
2642819 CC 0 325-475 0-7 475 10.5-12.5 700 14.5-16.5 2250 0 8-10 5-8 13 9-12 16.0
2642822 CC 0 325-475 0-5.5 475 8-10 700 12.5-14.5 2400 0 8-10 5-8 13 9-12 16.0
2642832 (5) CC 0 450-600 0-7 600 9.8-11.8 810 14-16 1550 0 6-9 4.5-7.5 12 8.25-11 15.0
2642899 (6) CC 0 325-475 0-4 475 4.5-6.5 640 8.5-10.5 2200 0 8-10 5-8 13 9-12 16
2642911 (7) CC 0 325-475 0-7 475 10.5-12.5 700 14.5-16.5 2250 0 8-10 5-8 13 9-12 16
2642949 CC 0 375-525 0-6.5 525 7.8-9.8 710 14.5-16.5 2300 0 4.5-8 6-9 12 11.5-14.5 16.5
(1) C (Clockwise) CC (Counterclockwise) viewed from rotor end.
(2) POL. IBS-4013A.
(3) POL. IBS-4013B.
(4) POL. IBS-4006P.
(5) POL. IBS-4006W.
(6) POL. IGS-4006Z.
(7) POL. IGS-4006Y.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.