Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1967CHEVELLE BASE, 4.1L ENG, AUTOMATIC TRANS, TRANS MFR CD POWERGLIDEREPAIR AND DIAGNOSISGENERAL INFORMATIONELECTRICALMAP - ELECTRICAL SYSTEMSELECTRICAL SYSTEMSBULB SOCKETS
1967 Chevrolet Chevelle Base, 4.1L Eng, Automatic Trans, Trans Mfr CD Powerglide
Bulb Sockets
1967 Chevrolet Chevelle Base, 4.1L Eng, Automatic Trans, Trans Mfr CD PowerglideSECTION Bulb Sockets
| Condition | Code | Procedure |
|---|---|---|
| Attaching hardware broken | A | Require repair or replacement of hardware |
| Attaching hardware missing | C | Require replacement of hardware |
| Attaching hardware not functioning | A | Require repair or replacement of hardware |
| Broken | A | Require repair or replacement |
| Bulb seized in socket | A | Require repair or replacement |
| Burned, affecting performance | A | Require repair or replacement |
|
NOTE:
Determine cause and correct prior to repair or replacement of socket.
|
||
| Burned, not affecting performance | 2 | Suggest repair or replacement |
|
NOTE:
Determine cause and correct prior to repair or replacement of socket.
|
||
| Connector (Weatherpack type) leaking | A | Require repair or replacement |
| Connector broken | A | Require repair or replacement |
| Connector melted | A | Require repair or replacement |
|
NOTE:
Determine cause and correct prior to repair or replacement of part.
|
||
| Connector missing | C | Require replacement |
| Corroded, affecting performance | A | Require repair or replacement |
| Corroded, not affecting performance | 2 | Suggest repair or replacement |
| Leaking | B | Require repair or replacement |
| Melted | A | Require replacement |
|
NOTE:
Determine cause and correct prior to replacement of part.
|
||
| Shorted | A | Require repair or replacement |
| Terminal broken | A | Require repair or replacement |
| Terminal burned, affecting performance | A | Require repair or replacement |
|
NOTE:
Determine cause and correct prior to repair or replacement of part.
|
||
| Terminal burned, not affecting performance | 2 | Suggest repair or replacement |
| Terminal corroded, affecting performance | A | Require repair or replacement |
| Terminal corroded, not affecting performance | 2 | Suggest repair or replacement |
| Terminal loose, affecting performance | B | Require repair or replacement |
| Terminal loose, not affecting performance | 1 | Suggest repair or replacement |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.