SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1967CAMARO NOT AVAILABLE, 4.1L ENG, AUTOMATIC TRANSREPAIR AND DIAGNOSISENGINE PERFORMANCETUNE-UPDISTRIBUTOR SPECIFICATIONSDELCO-REMY DISTRIBUTOR ADVANCE SPECIFICATIONS
1967 Chevrolet Camaro Not Available, 4.1L Eng, Automatic Trans

DELCO-REMY Distributor Advance Specifications

1967 Chevrolet Camaro Not Available, 4.1L Eng, Automatic TransSECTION DELCO-REMY Distributor Advance Specifications
NOTE: FOR ENGINE RPM AND DEGREES, MULTIPLY SPECIFICATIONS BELOW BY 2.
Distributor Part No. Rot. (1) Automatic Advance (Distr. Degrees & RPM) Vacuum Advance (Distr. Deg. & In. of Hg.) Vacuum Unit
Deg. RPM Deg. RPM Deg. RPM Deg. RPM Start Deg. In.Hg. Max. Deg In.Hg. Part No.
1110292 C 0 300 7 750 .................... 14 1850 0 6 11.5 12 ...............
1110310 C 0-2 450 7-9 1350 .................... 13-15 2100 0 5-7 12 13.5-14.3 1116229
1110311 C 0-2 975 5-7 1600 .................... 9-11 2100 0 6-8 12 14.5-15.5 1116230
1110319 C 0-2 500 1-3 600 5-7 1500 9-11 2400 0 6-8 12 14.5-15.5 1116230
1110340 C 5-2.5 500 7-9 950 .................... 12-14 2200 0 5-7 11 16-17 1116207
1110351 C 0-2.5 500 2.5-4.5 565 6.5-8.5 800 13-15 1400 0 5-7 10 14.2-14.5 1116235
1110362 C 2-5.5 570 4.7-6.7 640 6.5-8.5 750 14-16 1600 0 5-7 10 14.2-14.5 1116235
1110366 C 0-2.8 360 2.5-4 450 9.5-11.5 950 14-16 2075 0 5-7 11 16-17 1116207
1110369 C 0-2.6 500 5-7.8 690 6.2-8.2 730 19-21 2200 0 6-8 12 14.5-15.5 1116230
1110376 C 0 350-475 7-9 900 .................... 12-14 2100 0 6-8 7-9 16 1116163
1110386 (2) C 0-3 500 7-9.5 1000 10-12 2400 9-12 3000 0 4-6 7.5 9-10.5 1115370
1110387 C 0 475 8.5 1050 .................... 13 2000 0 6 10.5 14.5 1116235
1110388 C 0 450 10 1000 .................... 14 1900 0 6 10.5 14.5 1116235
1110389 C 0 450 7 713 .................... 13 2200 0 7 12 15 1116230
1110391 C 0-2.5 500 10.5-12.5 1050 .................... 13-15 2800 0 4-6 7.5 (3)9.5-10.5 1115372
1110396 C 0-4 500 11.5-13.5 1300 .................... 16-18 1900 0 4-6 7.5 9.5-10.5 1115369
1110397 C 0-5.5 500 12-16 1200 .................... 19-21 2000 0 4-6 7.5 9.5-10.5 1115369
1110398 C 0 400 3.5-5.5 750 9-11 2150 9-11 3000 0 4-6 7.5(4) 9.25-10.25 1115368
1111029 CC 0-2 400 7.7-9.7 1025 .................... 14-16 2000 0 7-9 9.5 15-16.6 1116232
1111042 CC 0-2 400 6-8 900 .................... 10-12 2000 0 7-9 9.5 15-16.6 1116232
1111048 CC 0-2 400 7.5-9.5 1000 .................... 12-14 2125 0 7-9 9.5 15-16.6 1116232
1111089 CC 0-2 400 6.5-8.5 1200 .................... 13-15 2000 0 7-9 9.5 15-16.6 1116232
1111101 C 0-2 425 2-4 575 .................... 11-13 2000 0 8 7.5 15.5 1116201
1111106 C .6-2.6 500 7.5-9.5 925 .................... 15-17 2200 0 4-6 12 18-19.5 1115362
1111117 C 0-6.3 500 3.1-9.5 950 11.5-13.5 750 19-21 2550 0 6 7.5 12 1115355
1111131 C 0-1.5 400 2.5-4 600 5-7 1400 7-9 2000 0 10-12 12.75 18.5 1116192
1111144 C 2-4 430 5-7 850 .................... 13-15 2300 0 6-8 7-9 16 1116210
1111149 C 0-2.5 425 7.7-10.4 730 8.6-10.6 770 14-16 1850 0 6-8 7-9 16 1116163
1111150 C 0-2 500 4-6 700 6.5-8.5 1000 13-15 2100 0 8 7.5 15.5 1116201
1111151 CC 0-2 600 3.5-5.5 900 .................... 8-10 2100 0 8-10 9 17.2-19 1115361
1111152 C 0-3 500 1.5-4.5 550 6.5-8.5 750 12-14 2050 0 8 7.5 15.5 1116201
1111157 (2) C 0 450 8.5 800 .................... 14 2300 0 4 8 7 ...............
1111158 C 0 275-375 6-8 700 .................... 13-15 2300 0 6-8 7-9 16 1116163
1111159 C 0 275-425 5-7 850 .................... 13-15 2300 0 6-8 7-9 16 1116163
1111164 CC 0-2 450 8.5-9.5 1050 .................... 13-15 2300 0 6-8 10 13-14.5 1115364
1111165 CC 0-2 500 6.5-8.5 1000 .................... 11-13 2400 0 8-10 10 15-17 1115365
1111166(2) CC 0-2 450 6-8 1000 11-13 2400 10-13 3000 0 8-10 10 15-17 1115365
1111168 C 0 450 4.5 650 7.5 850 13 2350 0 10 7.5 17 1988961
1111169 C 0 450 4.25 625 8.5 1000 16 2500 0 8 7.5 15.5 1116201
1111170 C 0 450 4.25 625 8.5 1000 16 2500 0 7 6 12 1115360
1111179 CC 0-2 600 3.5-5.5 900 .................... 8-10 2000 0 8-10 9 17.2-19 1115361
1111180 (2) CC 0-2 500 10.5-12.5 1000 13-15 2200 12-15 3000 0 8-10 10 15-17 1115365
1111183 CC 0-2 500 10.5-12.5 1000 .................... 13-15 2200 0 8-10 10 15-17 1115365
1111188 (2) CC 0-2 400 6-8 900 .................... 10-12 2000 0 7-9 9.5 15-16.6 1116232
1111189 (2) CC 0-2 400 6.5-8.5 1200 .................... 13-15 2000 0 7-9 9.5 15-16.6 1116232
1111191 C 0-1 450 7.5-9.5 1000 .................... 13-15 2200 0 8-10 12 18.5-20.5 1115363
1111194 C 0 450 4.5 600 7.5 750 15 2550 0 6 7.5 12 1115355
1111195 C 0 450 4.5 600 7.5 750 15 2550 0 6 7.5 12 1115355
1111196 C 0 450 4.5 600 7.5 750 15 2550 0 4 8 7 1116236
1111198 C 0-1 375 7.5-9.5 800 .................... 14-16 1950 0 4-6 12 18-19.5 1115362
1111199 CC 0-2 450 8.5-9.5 950 .................... 13-15 2300 0 6-8 10 (4) 13-14.5 1115366
1111237 CC 0-2 500 10.5-12.5 1000 .................... 13-15 2200 0 8-10 10 (4) 15-17 1115367
1111238 CC 0-2 500 6.5-8.5 1000 .................... 11-13 2400 0 8-10 10 (4) 15-17 1115367
1111242 CC 0-2 500 5-7 1000 .................... 9-11 2300 0 6-8 10 13-14.5 1115364
1111243 CC 0-2 450 8.5-10.5 950 .................... 13-15 2300 0 8-10 10 15-17 1115365
1111244 CC 0-2 450 8.5-10.5 950 .................... 13-15 2300 0 8-10 10 15-17 1115367
1111245 (2) CC 0-2 450 8.5-10.5 950 .................... 12-15 3000 0 8-10 10 15-17 1115365
1111247 C 0 450 4.25 625 8.5 1000 16 2500 0 7 6 12 1115360
1111248 C 0 450 4.25 625 8.5 1000 16 2500 0 7 6 12 1115360
1111249 C 0 450 5.5 750 .................... 13 2050 0 8 7.5 15.5 1116201
1111250 CC 0-2 500 10.5-12.5 1000 .................... 13-15 2200 0 8-10 10 15-17 1115365
1111251 (2) CC 0-2 500 10.5-12.5 1000 13-15 2200 12-15 3000 0 8-10 10 15-17 1115365
1111252 CC 0-2 500 10.5-12.5 1000 .................... 13-15 2200 0 8-10 10 (4) 15-17 1115367
1111253 CC 0-2 500 5-7 1000 .................... 9-11 2300 0 10-12 10 17-19 1115374
1111254 CC 0-2 500 5-7 1000 .................... 9-11 2300 0 10-12 10 (4) 17-19 1115375
1111255 (2) CC 0-2 500 5-7 1000 9-11 2300 8-11 3000 0 10-12 10 17-19 1115374
1111256 C 0 450 7.75 800 .................... 15 2050 0 8 7.5 15.5 1116201
1111258 (2) C 0 450 .................... .................... 15 1900 0 8 7.5 15.5 1116201
1111261 CC 0-2 500 5-7 1000 .................... 9-11 2300 0 6-8 10 (4) 13-14.5 1115366
1112795 C 0-2 425 4.5-6.5 800 8-10 1600 11-13 2300 .................... .................... ..........
(1) C (Clockwise), CC (Counterclockwise) viewed from rotor end.
(2) Breakerless (Pulse Generator) Distributors used with Transsistor or Capacitor Ignition systems.
(3) Maximum retard 4-6° with 11" of Hg.
(4) Maximum retard 9-11° with 11" of Hg.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.