Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1966CHEVELLE BASE, 2D CONVERTIBLE, 5.3L ENG, AUTOMATIC TRANS, TRANS MFR CD THM400REPAIR AND DIAGNOSIS (SINGLE PAGE)GENERAL INFORMATIONBRAKESMAP - ROUTINE INSPECTION REFERENCE GUIDEROUTINE INSPECTION REFERENCE GUIDEROUTINE INSPECTION - UICSELECTRICAL SYSTEMSBATTERY TRAYS AND HOLD DOWN HARDWARE
1966 Chevrolet Chevelle Base, 2D Convertible, 5.3L Eng, Automatic Trans, Trans Mfr CD THM400
Battery Trays And Hold Down Hardware
1966 Chevrolet Chevelle Base, 2D Convertible, 5.3L Eng, Automatic Trans, Trans Mfr CD THM400SECTION Battery Trays And Hold Down Hardware
| Condition | Code | Procedure |
|---|---|---|
| Battery improperly secured | 2 | Suggest repair |
| Bent, affecting performance | A | Require repair or replacement |
| Bent, not affecting performance | No Service Suggested or Required | |
| Broken, affecting performance | A | Require repair or replacement |
| Broken, not affecting performance | No Service Suggested or Required | |
| Corroded, affecting performance | A | Require repair or replacement |
| Corroded, not affecting performance | 2 | Suggest repair or replacement |
| Cracked, affecting performance | A | Require repair or replacement |
| Cracked, not affecting performance | 1 | Suggest repair or replacement |
| Missing | C | Require replacement |
| Threads damaged | A | Require repair or replacement |
| Water drain clogged | A | Require repair |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.