SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1964CORVETTE NOT AVAILABLE, AUTOMATIC TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALFUEL SYSTEMHOLLEY 2, 3 & 4-BARREL MODELS 2300, 3160, 4150, 4160ADJUSTMENT (ON ENGINE)NOTES
1964 Chevrolet Corvette Not Available, Automatic Trans

Adjustment (On Engine): Notes

1964 Chevrolet Corvette Not Available, Automatic TransSECTION Notes
  • ADJUSTMENT NOTE:  If preliminary adjustment required to warm-up engine, set each idle mixture screw 1-1 1/2 turns out from a lightly seated position. On air conditioned cars (except Chevelle, Corvette, & Rambler), operate air conditioner for 20 minutes and then set idle speed with air conditioning operating. On cars with Vacuum Parking Brake Release, disconnect vacuum line at vacuum power unit and plug this line (necessary so that idle speed can be set in "D" with brakes set). On cars with Alternator (except Chevelle, Corvette, & Rambler), turn on headlights to place alternator under load. On automatic transmission cars, idle speed should be set with selector lever in "D" (Drive) or "N" (Neutral) as indicated.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.