Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC2013ESCALADE ESV PLATINUM, RWDREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - MEMORY SEAT MODULE X5 (AN3) TO YAW SENSORCOMPONENT CONNECTOR END VIEWSRADIO X3 (UYS)
2013 Cadillac Escalade ESV Platinum, RWD
Radio X3 (UYS)
2013 Cadillac Escalade ESV Platinum, RWDSECTION Radio X3 (UYS)
Connector Part Information
|
Terminal Part Information
|
Radio X3 (UYS)
| Pin | Wire | Circuit | Function |
|---|---|---|---|
| 1 | 0.35 L-BU | 5826 | Left DVD Audio Signal (+) |
| 2 | 0.35 PU | 6979 | DVD Audio Common |
| 3 | 0.35 YE | 2059 | Auxiliary Audio Left Signal |
| 4 | 0.35 PK/BK | 5844 | Video Bright Control |
| 5 | 0.35 L-GN/BK | 5845 | Video Module Signal |
| 6 | 0.35 OG/BK | 5831 | Remote Infra-Red Signal (+) |
| 7 | 0.35 PU | 2056 | Auxiliary Video High Signal |
| 8 | - | - | Not Used |
| 9 | 0.35 BARE | 6976 | DVD Video Drain Wire |
| 10 | 0.35 D-GN | 6975 | Video Module Signal |
| 11 | 0.35 WH | 5828 | Right DVD Audio Signal (+) |
| 12 | 0.35 BARE | 6980 | DVD Audio Shield |
| 13 | 0.35 WH | 2058 | Auxiliary Audio Right Signal |
| 14 | 0.35 BARE | 5345 | Drain Wire |
| 15 | - | - | Not Used |
| 16 | 0.35 TN/WH | 5830 | Remote Infra-Red Signal (-) |
| 17 | 0.35 BARE | 5346 | Video Drain Wire |
| 18-19 | - | - | Not Used |
| 20 | 0.35 WH/BK | 5335 | DVD Video Signal (-) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.