SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC2013ESCALADE ESV PLATINUM, RWDREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - EEBCM MODULE (OVER 8600 GVW) TO MEMORY SEAT MODULE X4 (AN3)COMPONENT CONNECTOR END VIEWSINFLATABLE RESTRAINT STEERING WHEEL MODULE COIL X2 CONNECTOR END VIEW
2013 Cadillac Escalade ESV Platinum, RWD

Inflatable Restraint Steering Wheel Module Coil X2 Connector End View

2013 Cadillac Escalade ESV Platinum, RWDSECTION Inflatable Restraint Steering Wheel Module Coil X2 Connector End View
GM1593397Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Steering Wheel
  • OEM Connector: 15393433
  • Service Connector: 22710638
  • Description: 10-Way F (BK)
Terminal Part Information
  • Terminated Lead: Service by Harness - See Part Catalog
  • Release Tool: 12180559-1
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: Service with Terminated Lead
  • Core/Insulation Crimp: N/A
Inflatable Restraint Steering Wheel Module Coil X2

Pin Wire Circuit Function
A 0.35 GY 1884 Cruise Control Switch Signal
B - - Not Used
C 0.35 L-GN 6818 Steering Wheel Resistor Ladder Signal 1
D 0.35 BN 6136 Control
E 0.35 PK 1444 12-Volt Reference
F-G - - Not Used
H 0.35 D-GN/WH 7158 Cruise Control Indicator Dimming Signal
J 0.35 TN 28 Horn Relay Control
K 0.35 BK 1050 Ground
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.