SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC2013ESCALADE ESV PLATINUM, RWDREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - EEBCM MODULE (OVER 8600 GVW) TO MEMORY SEAT MODULE X4 (AN3)COMPONENT CONNECTOR END VIEWSHEADLAMP CONNECTOR END VIEW - RIGHT (T4Q)
2013 Cadillac Escalade ESV Platinum, RWD

Headlamp Connector End View - Right (T4Q)

2013 Cadillac Escalade ESV Platinum, RWDSECTION Headlamp Connector End View - Right (T4Q)
GM831375Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Forward Lamp
  • OEM Connector: 15326939
  • Service Connector: 88988440
  • Description: 12-Way F GT 150 280 Series, Sealed (BK)
Terminal Part Information
  • Pins: A, F, M, J
  • Terminated Lead: 13575405
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 15304719/19
  • Core/Insulation Crimp: 2/5
  • Pins: B-E, L
  • Terminated Lead: Pins B, D, E - 13575413
  • Terminated Lead: Pins C - 13327112
  • Terminated Lead: Pins L - 13327113
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-2A (GY)
  • Terminal/Tray: 12191819/8
  • Core/Insulation Crimp: Pins B-E - E/1
  • Core/Insulation Crimp: Pins L - 2/1
Headlamp - Right (T4Q)

Pin Wire Circuit Function
A 1 TN/WH 312 Right Headlamp Low Beam Control
B 0.5 L-GN/BK 592 DRL Low Control
C 0.35 L-BU 3203 Outage Detection Signal
D 0.5 D-BU 545 DRL Control
E 0.5 BN 2609 Right Front Park Lamp Control
F 1 BK 250 Ground
G-H - - Not Used
J 1 BK 250 Ground
K - - Not Used
L 0.8 L-GN/BK 311 Right Headlamp High Beam Control
M 1 BK 250 Ground
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.