SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC2013ESCALADE ESV PLATINUM, RWDREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - A/C COMPRESSOR TO EBCM (UNDER 8600 GVW)COMPONENT CONNECTOR END VIEWSBODY CONTROL MODULE (BCM) X6 CONNECTOR END VIEW
2013 Cadillac Escalade ESV Platinum, RWD

Body Control Module (BCM) X6 Connector End View

2013 Cadillac Escalade ESV Platinum, RWDSECTION Body Control Module (BCM) X6 Connector End View
GM1664502Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 15482793
  • Service Connector: 88988842
  • Description: 25-Way F HIT Series (PK)
Terminal Part Information
  • Pins: 1-5
  • Terminated Lead: 13327199
  • Release Tool: J-38125-12A
  • Diagnostic Test Probe: J-35616-35 (VT)
  • Terminal/Tray: SNAC-A061T-M2.8/20
  • Core/Insulation Crimp: C/A
  • Terminated Lead: 13575870
  • Release Tool: J-38125-12A
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: SNAC3-A021T-M0.64/20
  • Core/Insulation Crimp: J/J
Body Control Module (BCM) X6

Pin Wire Circuit Function
1 0.35 OG 157 Courtesy Lamp Control (SPO Accessory - Illuminated Sill Plates)
2 1 L-BU 20 Stop Lamp Control (X88 or Z88 with E52 or with TB7 or Z75 with E52 and with EXP)
3-11 - - Not Used
12 0.35 PK/BK 1303 Liftgate Ajar Switch Signal (E52 without E61)
13 0.35 GY 5797 Rear Closure Handle Switch Open Signal (E52 without E61)
14 0.35 L-GN/BK 748 Right Rear Door Ajar Switch Signal
15 0.35 L-BU/BK 747 Left Rear Door Ajar Switch Signal
16-23 - - Not Used
24 0.35 PK 6190 Lift Glass/Trunk Exterior Release Signal (E52 without E61)
25 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.