Radio Replacement (Cadillac)

2013 Cadillac Escalade ESV Platinum, RWDSECTION Radio Replacement (Cadillac)
Fig 1: Radio (Cadillac)
GM2458550Courtesy of GENERAL MOTORS COMPANY
Radio Replacement (Cadillac)

Callout Component Name
NOTE:

Use a scan tool to retrieve the radio part number before removing the radio from the vehicle.

Preliminary Procedure Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (Except Cadillac) , Instrument Panel Accessory Trim Plate Replacement (Cadillac) .
1 Radio Screw (Qty: 6)
CAUTION:

Refer to Fastener Caution .


Tighten 
2 N.m (18 lb in)
2 Radio Assembly
  • Disconnect the 4 electrical connectors.
  • Disconnect the antenna cable.
  • Transfer components, as necessary.
  • Reprogram the radio after replacement. Refer to Control Module References .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.