Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC2013CTS V, 2D COUPE, AUTOMATIC TRANSREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS (7 OF 7)COMPONENT CONNECTOR END VIEWSB63R SIDE IMPACT SENSOR - RIGHT (UFT)
2013 Cadillac CTS V, 2D Coupe, Automatic Trans
B63R Side Impact Sensor - Right (UFT)
2013 Cadillac CTS V, 2D Coupe, Automatic TransSECTION B63R Side Impact Sensor - Right (UFT)
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | 13575845 | J-35616-64B (L-BU) | J-38125-215A | SAIT-A03T-M064 | 14 | P | P |
B63R Side Impact Sensor - Right (UFT)
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | - | - | - | Not Occupied | - | - |
| 2 | 0.35 | RD/WH | 1640 | Battery Positive Voltage | I | - |
| 3 | 0.35 | D-GN | 5060 | Low Speed GMLAN Serial Data | I | - |
| 4 | 0.35 | D-GN | 5060 | Low Speed GMLAN Serial Data | I | - |
| 5 | 0.35 | BK | 1050 | Ground | I | - |
| 6 | 0.35 | BK | 1050 | Ground | I | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.