Installation Procedure

2013 Cadillac CTS V, 2D Coupe, Automatic TransSECTION Installation Procedure
    Fig 1: View of Wiper Arms
    GM1912985Courtesy of GENERAL MOTORS COMPANY
  1. Install the wiper blade onto the wiper arm. Refer to Windshield Wiper Blade ReplacementΒ .
  2. Install the wiper arm onto the wiper arm drive pivot shaft.
  3. Position the passenger side wiper arm so the wiper blade tip aligns with the orange dot on the lower outer edge of the windshield.
  4. Position the driver side wiper arm so that the wiper blade tip aligns with the orange dot on the lower center of the windshield.
  5. CAUTION:

    Refer to Fastener Caution .

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.