Windshield Washer Solvent Level Indicator Replacement

2013 Cadillac CTS V, 2D Coupe, Automatic TransSECTION Windshield Washer Solvent Level Indicator Replacement
Fig 1: Windshield Washer Solvent Level Indicator
GM1963060Courtesy of GENERAL MOTORS COMPANY
Windshield Washer Solvent Level Indicator Replacement

Callout Component Name
Preliminary ProcedureΒ 
Remove the right front wheelhouse extension. Refer to Wheelhouse Extension Replacement .
1 Windshield Washer Level Indicator

Procedure

  1. Place a clean suitable clean container under the washer container to secure spillage when removing the level indicator from the windshield washer solvent container.
  2. Disconnect the electrical connection at the windshield washer level indicator.
  3. Using two flat-bladed tools placed under the tab on the level indicator, gently pry outward in order to release the level indicator from the washer container grommet.
  4. Remove the level indicator and contain the windshield washer solvent.
  5. Discard the old windshield washer level indicator grommet.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.