SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC2013ATS 2.0L ENG VIN X, AWDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINFOTAINMENTCELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEMREPAIR INSTRUCTIONSRADIO REPLACEMENT
2013 Cadillac ATS 2.0L Eng VIN X, AWD

Radio Replacement

2013 Cadillac ATS 2.0L Eng VIN X, AWDSECTION Radio Replacement
Fig 1: Radio
GM2831010Courtesy of GENERAL MOTORS COMPANY
Radio Replacement

Callout Component Name

Preliminary Procedure

  1. Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement
  2. Remove the instrument panel insulator panel - right side. Refer to Instrument Panel Lower Trim Panel Insulator Replacement (Left Side) , Instrument Panel Lower Trim Panel Insulator Replacement (Right Side) .
1 Radio

Procedure

  1. Disconnect the electrical connections.
  2. Reposition the carpet as necessary to allow enough clearance for module removal.
  3. Slide module downward to release from bracket.
  4. Refer to Control Module References for programming and setup information.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.