SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC2013ATS 2.0L ENG VIN X, AWDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINFOTAINMENTCELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEMREPAIR INSTRUCTIONSRADIO CONTROL ASSEMBLY REPLACEMENT
2013 Cadillac ATS 2.0L Eng VIN X, AWD

Radio Control Assembly Replacement

2013 Cadillac ATS 2.0L Eng VIN X, AWDSECTION Radio Control Assembly Replacement
Fig 1: Radio Control Assembly
GM2830998Courtesy of GENERAL MOTORS COMPANY
Radio Control Assembly Replacement

Callout Component Name

Preliminary Procedure

  1. Remove the radio front center speaker grille. Refer to Radio Front Center Speaker Grille Replacement  .
  2. Remove the front floor console trim plate. Refer to Front Floor Console Trim Plate Replacement .
1 Radio Control Fasteners (Qty: 4)
CAUTION:

Refer to Fastener Caution .
2 Radio Control Assembly

Procedure

  1. Disconnect the electrical connections.
  2. When replacing the radio control assembly, transfer all necessary components.
  3. Refer to Control Module References for programming and setup information.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.