Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC2013ATS 2.0L ENG VIN X, AWDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINFOTAINMENTCELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEMDIAGNOSTIC INFORMATION AND PROCEDURESDTC B12A4: INFOTAINMENT FACEPLATE CONTROL MODULE ACIRCUIT/SYSTEM VERIFICATION
2013 Cadillac ATS 2.0L Eng VIN X, AWD
Circuit/System Verification
2013 Cadillac ATS 2.0L Eng VIN X, AWDSECTION Circuit/System Verification
- Ignition ON.
- Verify DTC B12A4 39 is not set.
- If DTC B12A4 39 is set
Replace the P17 Info Display Module.
- If DTC B12A4 39 is not set
- If DTC B12A4 39 is set
- Verify DTC B12A4 45 is not set.
- If DTC B12A4 45 is set
- Program the P17 Info Display Module.
- Verify the DTC does not set.
- If the DTC sets, replace the P17 Info Display Module.
- If the DTC does not set
- All OK
- If DTC B12A4 45 is not set
- All OK.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.