SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC2011CTS V, 2D COUPE, STANDARDREPAIR AND DIAGNOSISHEATING, VENTILATION & A/C (HVAC)HVAC CONTROL SYSTEMSHEATING, VENTILATION, AND AIR CONDITIONINGREPAIR INSTRUCTIONSBLOWER MOTOR CONTROL MODULE REPLACEMENT
2011 Cadillac CTS V, 2D Coupe, Standard

Blower Motor Control Module Replacement

2011 Cadillac CTS V, 2D Coupe, StandardSECTION Blower Motor Control Module Replacement
Fig 1: View Of Blower Motor Control Processor (LHD)
GM1788800Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the right sound insulator. Refer to Instrument Panel Insulator Replacement - Right Side (Left Hand Drive) or Instrument Panel Insulator Replacement - Right Side (Right Hand Drive) .
  2. Remove the I/P Compartment. Refer to Instrument Panel Compartment Replacement (Left Hand Drive) or Instrument Panel Compartment Replacement (Right Hand Drive) .
  3. Remove the electrical connectors from the blower motor control processor.
1 Blower Motor Control Processor Screw (Qty: 2)
CAUTION: Refer to FASTENER CAUTION .

Tighten:  9 N.m (80 lb in)
2 Blower Motor Control Processor
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.