Electronic Suspension Control (ESC) Module (F55) Connector End View

2011 Cadillac CTS V, 2D Coupe, StandardSECTION Electronic Suspension Control (ESC) Module (F55) Connector End View
Fig 1: Electronic Suspension Control (ESC) Module (F55) Connector End View
GM1711002Courtesy of GENERAL MOTORS CORP.
Electronic Suspension Control (ESC) Module (F55)

Pin Wire Circuit Function
1 - - Not Used
2 0.35 PU/WH 1205 Left Front Suspension Position Sensor Voltage Reference
3 0.35 PU/WH 1211 Right Front Suspension Position Sensor Voltage Reference
4 0.35 OG/BK 1208 Left Rear Suspension Position Sensor Voltage Reference
5 0.35 OG/BK 1214 Right Rear Suspension Position Sensor Voltage Reference
6-10 - - Not Used
11 0.35 L-GN/BK 1215 Right Rear Suspension Position Sensor Low Reference
12-16 - - Not Used
17 0.35 TN/WH 1207 Left Front Suspension Position Sensor Signal
18 0.35 TN/WH 1213 Right Front Suspension Position Sensor Signal
19 0.35 L-GN/WH 1216 Right Rear Suspension Position Sensor Signal
20-23 - - Not Used
24 0.5 TN 2501 High Speed GMLAN Serial Data Bus -
25 0.5 TN/BK 2500 High Speed GMLAN Serial Data Bus +
26 0.35 L-BU/BK 1212 Right Front Suspension Position Sensor Low Reference
27 0.35 L-GN/BK 1209 Left Rear Suspension Position Sensor Low Reference
28 0.8 OG/BK 1013 Left Rear Damper Low Reference
29 0.8 BN 1009 Right Front Damper Low Reference
30 0.8 L-GN 1005 Left Front Damper Low Reference
31 0.35 L-BU 5986 Serial Data Communication Enable
32 2 RD/WH 5340 Battery Positive Voltage
33 0.35 L-GN/WH 1210 Left Rear Suspension Position Sensor Signal
34-38 - - Not Used
39 0.5 TN 2501 High Speed GMLAN Serial Data Bus -
40 0.5 TN/BK 2500 High Speed GMLAN Serial Data Bus +
41 0.35 L-BU/BK 1206 Left Front Suspension Position Sensor Low Reference
42 0.8 YE 1014 Right Rear Damper Control
43 0.8 OG 1010 Left Rear Damper Control
44 0.8 PU 1017 Right Rear Damper Low Reference
45 0.8 WH/BK 1006 Right Front Damper Control
46 0.8 OG/BK 1448 Left Front Damper Control
47 2 BK 850 Ground
Connector Part Information 
  • Harness Type: Body
  • OEM Connector: ASGPB-47R1A-K
  • Service Connector: Pending
  • Description: 47-Way F ASG Series (BK)
Terminal Part Information 
  • Pins: 1, 32
  • Terminated Lead: Pending
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-42 (RD)
  • Terminal/Tray: 15476168/5
  • Core/Insulation Crimp: F/3
  • Pins: 2-15, 18-31, 33-46
  • Terminated Lead: SEALED: 13576387 UNSEALED: 13578917
  • Release Tool: J-38125-215A
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: SAITS-A03T-M064/14
  • Core/Insulation Crimp: 9/9
  • Pins: 47
  • Terminated Lead: 13327187
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-42 (RD)
  • Terminal/Tray: 15476168/5
  • Core/Insulation Crimp: F/3
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.