SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC2011CTS V, 2D COUPE, STANDARDREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - A/C COMPRESSOR CLUTCH THROUGH BODY CONTROL MODULECOMPONENT CONNECTOR END VIEWSBODY CONTROL MODULE (BCM) X5 CONNECTOR END VIEW
2011 Cadillac CTS V, 2D Coupe, Standard

Body Control Module (BCM) X5 Connector End View

2011 Cadillac CTS V, 2D Coupe, StandardSECTION Body Control Module (BCM) X5 Connector End View
Fig 1: Body Control Module (BCM) X5 Connector End View
GM1664500Courtesy of GENERAL MOTORS CORP.
Body Control Module (BCM) X5

Pin Wire Circuit Function
1 0.8 YE 18 Left Rear Stop/Turn Lamp Supply Voltage (without T90)
0.8 L-BU 14 Left Turn Signal Lamps Supply Voltage (T90)
2 0.8 D-BU 15 Right Turn Signal Lamps Supply Voltage (T90)
0.8 D-GN 19 Right Rear Stop/Turn Lamp Supply Voltage (without T90)
3 - - Not Used
4 0.8 L-BU/WH 1314 Left Front Turn Signal Lamp Supply Voltage/Left Turn Signal Indicator Lamp Supply Voltage
5 0.8 L-BU 1320 CHMSL Supply Voltage/Stop Lamp Supply Voltage
6 0.35 WH 17 Stop Lamp Switch Signal or Stop Lamp Supply Voltage
7 0.35 WH 2282 Headlamp Washer Relay Control (CE4)
8 0.35 PK 5076 Current Sensor Supply Voltage
9 0.35 WH 5075 Current Sensor Signal
10 0.35 BN 5077 Current Sensor Low Reference
11 0.35 D-BU 5985 Accessory Wakeup Serial Data
12 - - Not Used
13 0.35 OG 300 Ignition 3 Voltage
14 - - Not Used
15 0.35 PK/BK 109 Hood Ajar Switch Signal (BTV or UTT)
16 0.35 OG/BK 233 Park Brake Switch Signal (without J77)
17 0.35 YE 5356 Left Tail Lamp Outage Detection Signal
18 0.35 TN 28 Horn Relay Control
19 0.35 D-GN 801 Retained Accessory Power Fuse Supply Voltage
20 0.35 GY 91 Windshield Wiper Switch Signal 2
21 0.35 TN 860 Front Windshield Wiper Switch High Signal
22 - - Not Used
23 0.35 PK/WH 1970 Headlamp Relay Control
24 0.35 D-BU 45 Park Lamp Supply Voltage/Marker Lamp Supply Voltage
25 - - Not Used
Connector Part Information 
  • Harness Type: Instrument Panel
  • OEM Connector: 15480179
  • Service Connector: 88988837
  • Description: 25-Way F HIT Series (BN)
Terminal Part Information 
  • Pins: 1, 2, 4, 5
  • Terminated Lead: 13327199
  • Release Tool: J-38125-12A
  • Diagnostic Test Probe: J-35616-35 (VT)
  • Terminal/Tray: SNAC-A061T-M2.8/20
  • Core/Insulation Crimp: E/A
  • Pins: 6-11, 13-18, 20, 21, 23, 24
  • Terminated Lead: SEALED: 13576402 UNSEALED: 13575870
  • Release Tool: J-38125-12A
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: SNAC3-A021T-M0.64/20
  • Core/Insulation Crimp: J/J
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.