SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC2011CTS V, 2D COUPE, STANDARDREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - A/C COMPRESSOR CLUTCH THROUGH BODY CONTROL MODULECOMPONENT CONNECTOR END VIEWSAUXILIARY BODY CONTROL MODULE X2 (UA2) CONNECTOR END VIEW
2011 Cadillac CTS V, 2D Coupe, Standard

Auxiliary Body Control Module X2 (UA2) Connector End View

2011 Cadillac CTS V, 2D Coupe, StandardSECTION Auxiliary Body Control Module X2 (UA2) Connector End View
Fig 1: Auxiliary Body Control Module X2 (UA2) Connector End View
GM1552610Courtesy of GENERAL MOTORS CORP.
Auxiliary Body Control Module (XBCM) X2 (UA2)

Pin Wire Circuit Function
A 0.8 L-GN 1624 Trailer Backup Lamp Supply Voltage (V2S)
B 1 RD/WH 3040 Battery Positive Voltage (V2S)
C 0.8 D-GN 6165 All Door Deadbolt Motor Lock Control (UTT)
D 1 GY 5911 Door Lock Actuator Lock Control 2 (UTT)
E - - Not Used
F 1 GY 295 Door Lock Actuator Lock Control (UTT)
G - - Not Used
H 0.8 WH 5190 Trailer Fog Lamp (V2S)
Connector Part Information 
  • Harness Type: Body
  • OEM Connector: 15357040
  • Service Connector: 12110626
  • Description: 8-Way F Metri-Pack 280 (L-GY)
Terminal Part Information 
  • Terminated Lead: Pending
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 12110842/4
  • Core/Insulation Crimp: C/A
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.