SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC2011CTS V, 2D COUPE, STANDARDREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - A/C COMPRESSOR CLUTCH THROUGH BODY CONTROL MODULECOMPONENT CONNECTOR END VIEWSAUDIO AMPLIFIER X4 (UQS) CONNECTOR END VIEW
2011 Cadillac CTS V, 2D Coupe, Standard

Audio Amplifier X4 (UQS) Connector End View

2011 Cadillac CTS V, 2D Coupe, StandardSECTION Audio Amplifier X4 (UQS) Connector End View
Fig 1: Audio Amplifier X4 (UQS) Connector End View
GM1664488Courtesy of GENERAL MOTORS CORP.
Audio Amplifier X4 (UQS)

Pin Wire Circuit Function
1-2 - - Not Used
3 0.35 D-BU 546 Right Rear Low Level Audio Signal (+)
4 0.35 TN 1946 Right Rear Low Level Audio Signal (-)
5 0.35 WH 6763 Subwoofer Low Level Audio Signal (+)
6 0.35 PK 6762 Subwoofer Low Level Audio Signal (-)
7-10 - - Not Used
11 0.35 BN/WH 599 Left Rear Low Level Audio Signal (+)
12 0.35 BN 1999 Left Rear Low Level Audio Signal (-)
13 0.35 D-BU 6760 Center Channel Low Level Audio Signal (+)
14 0.35 OG 6761 Center Channel Low Level Audio Signal (-)
15-16 - - Not Used
Connector Part Information 
  • Harness Type: Body
  • OEM Connector: 7283-9078-80
  • Service Connector: Pending
  • Description: 16-Way F Kaizen 64 Series (BN)
Terminal Part Information 
  • Terminated Lead: 13575845
  • Release Tool: J-38125-215A
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: SAIT-A03T-M064/14
  • Core/Insulation Crimp: P/P
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.