Fastener Tightening Specifications

2009 Cadillac Escalade ESV AWDSECTION Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Accelerator Actuator Screws 2.5 N.m 22 lb in
Accelerator Pedal Bracket Nuts 9 N.m 80 lb in
Adjustable Pedal Bracket Nuts 36 N.m 27 lb ft
Adjustable Pedal Bracket to Dash Panel Bolt 36 N.m 27 lb ft
Brake and Accelerator Pedal Position Sensor Bolts 2 N.m 18 lb in
Brake Pedal Pushrod Retainer Bolt 10 N.m 89 lb in
Master Cylinder Nuts - With JL4 32 N.m 24 lb ft
Master Cylinder Nuts - Without JL4 25 N.m 18 lb ft
Transmission Range Selector Cable Support Bolt 10 N.m 89 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.