Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Distance Sensing Cruise Control Module Replacement
2007 Cadillac XLR VSECTION Distance Sensing Cruise Control Module Replacement
Distance Sensing Cruise Control Module Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the rear window panel assembly. Refer to Rear Window Panel Trim Replacement . |
|
| 1 | Cruise Control Module Bolt (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 3 N.m (27 lb in) |
| 2 | Cruise Control Module Tip: Disconnect the electrical connector and remove from the bracket. Refer to Control Module References for programming and setup information. |
| 3 | Cruise Control Module Bracket Nut (Qty: 2) Tighten: 3 N.m (27 lb in) |
| 4 | Cruise Control Module Bracket |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.