Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Circuit/System Verification
2007 Cadillac XLR BaseSECTION Circuit/System Verification
- Ignition ON, verify that DTC P0562, P0563 in the ECM and/or B1325 in the BCM are not current.
- If one of those DTCs is found as a current DTC, refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Verify that DTC C0800 is current in the scan tool.
- If the DTC is not current, refer to Charging System Test .
- If the DTC is current, go to Circuit/System Testing .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.