SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC2007ESCALADE AWDREPAIR AND DIAGNOSISSTEERINGSTEERING WHEEL & STEERING COLUMNREPAIR INSTRUCTIONSSTEERING WHEEL HEAT MODULE REPLACEMENT
2007 Cadillac Escalade AWD

Steering Wheel Heat Module Replacement

2007 Cadillac Escalade AWDSECTION Steering Wheel Heat Module Replacement
Fig 1: View Of Steering Wheel Heat Module & Screws
GM1728559Courtesy of GENERAL MOTORS CORP.
Steering Wheel Heat Module Replacement

Callout Component Name
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .

Preliminary Procedures

  1. Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement .
  2. Remove the horn switch. Refer to Horn Switch Replacement .
1 Steering Wheel Heat Module Screws (Qty: 5)
2 Steering Wheel Heat Module
Tip:  Disconnect the electrical connector.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.