Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Module Replacement - Seat Climate Control - Front Seat (Except Cadillac)
2007 Cadillac Escalade AWDSECTION Module Replacement - Seat Climate Control - Front Seat (Except Cadillac)
Module Replacement - Seat Climate Control - Front Seat (Except Cadillac)
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the front passenger seat. Refer to Front Seat Replacement - Bucket . |
|
| 1 | Passenger Seat Adjuster Outer Finish Cover Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat (Manual) or Seat Cushion Outer Trim Panel Replacement - Front Seat (Power) . |
| 2 | Passenger Seat Adjuster Inner Finish Cover Refer to Seat Cushion Inner Trim Panel Replacement - Front . |
| 3 | Passenger Seat Riser Finish Cover Tip: Pull rearward to disengage the cover from the seat riser. |
| 4 | Passenger Seat Cushion Cover and Pad Refer to Seat Cushion Trim Cover and Pad Replacement . |
| 5 | Passenger Seat Adjuster Assembly Refer to Front Seat Adjuster Replacement (Power) . |
| 6 | Front Seat Climate Control Module Bolt (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 9 N.m (80 lb in) |
| 7 | Front Seat Climate Control Module Tip: Disconnect the electrical connector. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.