SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC2006SRX 4.6 A, AWDREPAIR AND DIAGNOSISSTEERINGSTEERING WHEEL AND STEERING COLUMNSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Cadillac SRX 4.6 A, AWD

Fastener Tightening Specifications

2006 Cadillac SRX 4.6 A, AWDSECTION Fastener Tightening Specifications
Fastener Tightening Specifications

Application Specification
Metric English
Ignition Lock Cylinder Case Screws 7 N.m 62 lb in
Intermediate Shaft Bolts 30 N.m 22 lb ft
Intermediate Shaft to the Steering Column Pinch Bolt 48 N.m 35 lb ft
Intermediate Shaft to the Steering Gear Pinch Bolt 50 N.m 37 lb ft
Steering Column Mounting Nuts 25 N.m 18 lb ft
Steering Column Trim Cover Screws Lower 3.5 N.m 31 lb in
Steering Column Trim Cover Screws Upper 1.5 N.m 13 lb in
Steering Wheel Control Harness Retainer Screws 2.3 N.m 20 lb in
Steering Wheel Control Switch Screws 2.3 N.m 20 lb in
Steering Wheel Nut 41 N.m 30 lb ft
Turn Signal Multifunction Switch Screw Side 7 N.m 62 lb in
Turn Signal Multifunction Switch Screw Top 3 N.m 27 lb in
Upper Intermediate Shaft to Lower Intermediate Shaft Pinch Bolt 30 N.m 22 lb ft
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.