Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCADILLAC2006SRX 4.6 A, AWDREPAIR AND DIAGNOSISBODY & FRAMESEATSSEAT SYSTEMREPAIR INSTRUCTIONSSEAT BACK FRAME REPLACEMENT - FRONTREMOVAL PROCEDURE

2006 Cadillac SRX 4.6 A, AWD

Removal Procedure

2006 Cadillac SRX 4.6 A, AWDSECTION Removal Procedure

CAUTION: Refer to SIR Caution in Cautions and Notices.

Remove the front bucket seat. Refer to Seat Replacement - Bucket .
Remove the seat cushion from seat. Refer to Seat Cushion Replacement - Front .

Fig 1: Locating Trim Cover Push-In Retainer

Courtesy of GENERAL MOTORS CORP.

Remove the push-in retainer (1) from the trim covers.
Remove the trim covers.
Remove the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Front .
Remove the front seat belt assembly. Refer to Seat Belt Replacement - Front .

Fig 2: View Of Seat Back Frame Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.