Personalization System Malfunction

2006 Cadillac SRX 4.6 A, AWDSECTION Personalization System Malfunction
Personalization System Malfunction

Step Action Yes No
Schematic Reference:Β Instrument Cluster Schematics in Instrument Panel, Gages, and Console
1 Did you perform the Diagnostic System Check - Vehicle? Go to Step 2Β  Go to Diagnostic System Check - Vehicle in Vehicle DTC Information
2 Use the vehicle key fob to unlock the door. Refer to Keyless Entry System Description and Operation in Keyless Entry.
Does the vehicle key fob operate properly?
Go to Step 3Β  Go to Symptoms - Keyless Entry in Keyless Entry
3 Is the vehicle equipped with a navigation system? Go to Step 5Β  Go to Step 4Β 
4 Select Driver 1 or Driver 2 from the radio. Refer to Radio/Audio System Description and Operation in Entertainment.
Does the radio personalization feature operate properly?
Go to Step 7Β  Go to Symptoms - Entertainment in Entertainment
5 Select Driver 1 or Driver 2 from the navigation system. Refer to Navigation System Description and Operation in Navigation Systems.
Does the navigation system personalization feature operate properly?
Go to Step 6Β  Go to Symptoms - Navigation Systems in Navigation Systems
6 Activate the voice recognition of the Navigation System. Refer to Navigation System Description and Operation in Navigation Systems.
Does the voice recognition of the Navigation System operate properly?
Go to Step 7Β  Go to Symptoms - Navigation Systems in Navigation Systems
7 Are multiple personalization features of the vehicle inoperative? Go to Step 8Β  Go to the subsection with the single personalization feature that is inoperative
8 Replace the remote control door lock receiver (RCDLR). Refer to Control Module References in Computer/Integrating Systems for replacement, setup, and programming.
Did you find and correct the condition?
Go to Step 9Β  -
9 Operate the system in order to verify the repair.
Did you correct the condition?
System OK Go to Step 2Β 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.