Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Removal Procedure
2006 Cadillac SRX 4.6 A, AWDSECTION Removal Procedure
- Remove the adjustable brake pedal from the vehicle. Refer to Brake Pedal Assembly Replacement (With Adjustable Pedals) .
- Remove the adjustable brake pedal cable from the motor. In order to release the adjustable brake pedal cable from the adjustable brake pedal motor carefully squeeze the collar of the cable and pull outward from the motor.
- In order to remove the adjustable brake pedal cable from the brake pedal assembly carefully lift the retaining tabs (1) on the cable end using 2 thin bladed tools.
- Carefully pull upward remove the adjustable brake pedal cable assembly from the brake pedal assembly.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.