Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCADILLAC2006SRX 4.6 A, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEEXTERIOR/INTERIOR TRIMINSTRUMENT PANEL SYSTEM DISPLAYS, GAUGES AND CONSOLEREPAIR INSTRUCTIONSCOMPARTMENT REPLACEMENT - INSTRUMENT PANEL (I/P)REMOVAL PROCEDURE

2006 Cadillac SRX 4.6 A, AWD

Removal Procedure

2006 Cadillac SRX 4.6 A, AWDSECTION Removal Procedure

Fig 1: Locating Door Arm Tabs

GM886393

Courtesy of GENERAL MOTORS CORP.

Open the I/P compartment door
Release the tabs (1) on inboard side of the door arms.

Fig 2: View Of I/P Compartment Door Screws

GM716865

Courtesy of GENERAL MOTORS CORP.

Lower the door all the way down.
Remove the screws securing the I/P compartment door.

Fig 3: View Of I/P Compartment Screws

GM716867

Courtesy of GENERAL MOTORS CORP.

Remove the screws (2) securing the I/P compartment.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.