SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC2006SRX 4.6 A, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESCOMPUTER/INTEGRATING SYSTEMSCOMPONENT LOCATORCOMPUTER/INTEGRATING SYSTEMS CONNECTOR END VIEWSREAR INTEGRATION MODULE (RIM) C2
2006 Cadillac SRX 4.6 A, AWD

Rear Integration Module (RIM) C2

2006 Cadillac SRX 4.6 A, AWDSECTION Rear Integration Module (RIM) C2
Rear Integration Module (RIM) C2

GM255037Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12160778
  • 24-Way F Micro-Pack 100 Series (BN)
Pin Wire Color Circuit No. Function
A1 TN 755 RAP Relay Coil Control (C3B/CF5 w/o T79)
A2 - - Not Used
A3 YE 1977 Rear Fog Lamp Relay Control (T79)
A4 - - Not Used
A5 D-GN/WH 1135 A/T Shift Lock Control Solenoid Supply Voltage
A6 BN/WH 1429 Standing Lamp Relay Control (T79)
A7 - - Not Used
A8 PK 5363 Inclination Sensor Low Reference (UA2)
A9 - - Not Used
A10 GY 157 Courtesy Lamp Control
A11 RD/WH 540 Courtesy Lamp Control
A12 PU 1807 Class 2 Serial Data
B1 WH 193 Rear Defog Relay Control
B2 D-GN 646 Reverse Relay Control
B3-B4 - - Not Used
B5 D-BU 1393 Courtesy Lamps Supply Voltage
B6 YE 5058 Intrusion Sensor Armed Signal (UA2)
B7 PK/BK 1503 Passenger Heated Seat High/Low Signal (KA1)
B8 PK 1501 Driver Heated Seat High/Low Signal (KA1)
B9 - - Not Used
B10 GY 157 Courtesy Lamp Control
B11 BK 1050 Ground
B12 PU 1807 Class 2 Serial Data
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.