SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC2006SRX 4.6 A, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESCOMPUTER/INTEGRATING SYSTEMSCOMPONENT LOCATORCOMPUTER/INTEGRATING SYSTEMS CONNECTOR END VIEWSDASH INTEGRATION MODULE (DIM) C2
2006 Cadillac SRX 4.6 A, AWD

Dash Integration Module (DIM) C2

2006 Cadillac SRX 4.6 A, AWDSECTION Dash Integration Module (DIM) C2
Dash Integration Module (DIM) C2

GM255037Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12160778
  • 24-Way F Micro-Pack 100 Series (BN)
Pin Wire Color Circuit No. Function
A1-A3 - - Not Used
A4 D-GN 44 Instrument Panel Lamps Dimmer Switch Signal
A5 - - Not Used
A6 YE 5005 Instrument Panel Lamps Dimmer Switch Low Reference
A7 L-BU/BK 1688 5-Volt Reference
A8 TN/WH 99 Windshield Washer Fluid Level Signal
A9 L-BU 1717 Hazard Switch Output
A10 - - Not Used
A11 PU 1807 Class 2 Serial Data
A12 PU 1807 Class 2 Serial Data
B1 PK/BK 109 Hood Ajar Switch Signal (UA2)
B2 WH 103 Headlamp Switch Headlamps On Signal
B3 BN/WH 301 Rear Park Lamps Supply Voltage
B4 WH 1538 Windshield Wiper Switch On Signal
B5 PU 1783 Twilight Sentinel Delay Signal
B6 OG 192 Front Fog Lamp Switch Signal
B7 L-BU 187 Rear Fog Lamp Switch Signal (T79)
B8 BN 1356 Flash-To-Pass Switch Signal
B9 PK/BK 1597 Courtesy Lamps Switch On Signal
B10 L-GN 80 Key In Ignition Switch Signal
B11-B12 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.