105. Oil Pump Suction Pipe and Screen Assembly Installation

2005 Cadillac SRX AWD V8-4.6L VIN ASECTION 105. Oil Pump Suction Pipe and Screen Assembly Installation
Oil Pump Pipe and Screen Assembly Installation





1. Install NEW oil pump pipe gasket on oil pump pipe.





2. Notice: Refer to Fastener Notice.

Install the oil pump pick-up retaining bolt and nut.
^ Tighten the oil pump pick-up tube nut to 24 Nm (18 ft. lbs.).
^ Tighten the oil pump pick-up tube bolt to 10 Nm (89 inch lbs.).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.