Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC2005SRX AWD V8-4.6L VIN AREPAIR AND DIAGNOSISBODY AND FRAMESEATSMEMORY POSITIONING SYSTEMSMEMORY POSITIONING MODULESERVICE AND REPAIR
2005 Cadillac SRX AWD V8-4.6L VIN A
Memory Positioning Module: Service and Repair
2005 Cadillac SRX AWD V8-4.6L VIN ASECTION Service and Repair
MEMORY SEAT CONTROL MODULE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the front seat cushion.
CAUTION: Refer to SIR Caution in Service Precautions.
2. Disconnect the electrical connectors from the heated seat module.
3. Remove the screws (1) retaining the memory seat module to the seat frame.
4. Remove the memory seat module.
INSTALLATION PROCEDURE
1. Install the memory seat module and install the memory seat module screws (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws 2 N.m (18 lb in).
2. Connect the electrical connections to the module.
3. Install the front seat cushion.
4. Calibrate the memory seat module for proper adjustable pedal operation. Refer to Adjustable Pedal Calibration in Accessories.
5. Calibrate the seat. Refer to Memory Seat Calibration Procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.