Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCADILLAC2005CTS VREPAIR AND DIAGNOSISBODY & FRAMESEATSSEAT SYSTEMREPAIR INSTRUCTIONSMEMORY SEAT SWITCH REPLACEMENTINSTALLATION PROCEDURE

2005 Cadillac CTS V

Installation Procedure

2005 Cadillac CTS VSECTION Installation Procedure

Fig 1: View Of Switch Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Snap the door lock switch into the door switch bezel.
Connect the electrical connector.

Fig 2: Installing Switch Plate

Courtesy of GENERAL MOTORS CORP.

Insert the rear of the door lock switch into the door trim panel.
Press down on the front of the door lock switch to engage the switch to the door trim panel.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.