Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC1996ELDORADO V8-4.6L VIN 9REPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINAUTOMATIC TRANSMISSION/TRANSAXLESERVICE AND REPAIROVERHAULSUBASSEMBLY SERVICEUPPER CONTROL VALVE ASSEMBLY INSTALLATION
1996 Cadillac Eldorado V8-4.6L VIN 9
Upper Control Valve Assembly Installation
1996 Cadillac Eldorado V8-4.6L VIN 9SECTION Upper Control Valve Assembly Installation
UPPER CONTROL VALVE ASSEMBLY INSTALLATION 4T80-E TRANSAXLE
^ Tool Required:
- J 39068 Pump Assembly Guide Pins
1. Install the J 39068 pump assembly guide pins for the upper valve body. Install the following parts:
- The spacer plate to case cover gasket (328)
- The case cover spacer plate (327)
- The valve body to spacer plate gasket (326)
- The upper control valve body (300)
2. Install the upper-control valve body bolts (229, 329, 330, 331) and hand tighten
3. Remove the guide pins and install the remaining bolt.
Tighten
- Tighten the bolts to 11-13 N.m (8.0-9.5 lb. ft).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.