Instruments - GPS System Performance Degradation

1996 Cadillac Eldorado V8-4.6L VIN 9SECTION Instruments - GPS System Performance Degradation
Info - Global Position Sensor (GPS) Performance Degradation # 00-08-46-003B - (Feb 9, 2005)

Models:
1996-2005 Passenger Cars and Trucks
2002-2005 Saturn Vehicles

with Navigation Systems and/or OnStar(R)

This bulletin is being revised to include additional information. Please discard Corporate Bulletin Number 00-08-46-003A (Section 08 - Body and Accessories).

Navigation and OnStar(R) systems require a GPS antenna in order to function properly. This antenna may be located inside the vehicle. If the GPS antenna is located inside the vehicle, performance of the system may be compromised by window tinting film.

If the GPS system performance is in question and the vehicle has window tinting, a quick diagnostic check can be made by temporarily moving the GPS antenna to an external vehicle surface, such as the decklid or roof. If the GPS function of the navigation or On Star(R) system operates normally with the antenna relocated the repair would not be considered a warranty repair. The subsequent repair procedure or GPS placement would be up to the customer.

Some vehicles have the GPS antenna located on the rear window shelf Objects placed on the rear window shelf such as tissue boxes, books, dolls, etc,, also have the potential to interfere with GPS performance.

Warranty Information

Repairs made to the vehicle navigation and/or OnStar(R) system, which are the result of window tinting, are not considered warranty repairs.





Disclaimer
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.