Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC1996ELDORADO V8-4.6L VIN 9REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYCRANKSHAFT, ENGINEMAIN BEARING TORQUE SPECIFICATIONS
1996 Cadillac Eldorado V8-4.6L VIN 9
Main Bearing Torque Specifications
1996 Cadillac Eldorado V8-4.6L VIN 9SECTION Main Bearing Torque Specifications
| Main Bearing Bolt Torque Inboard Bolts have Stud Head. | 20 Nm + an additional 65 degrees in sequence shown. | 15 lb. ft. + an additional 65 degrees in sequence shown |
| Oil Manifold Bolts | 10 Nm | 89 lb. in. |
| Upper to Lower Crankase M8 bolts | 30 Nm | 22 lb. ft. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.