Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC1996ELDORADO V8-4.6L VIN 9REPAIR AND DIAGNOSISRELAYS AND MODULESRELAYS AND MODULES - BRAKES AND TRACTION CONTROLTRACTION CONTROL MODULETECHNICAL SERVICE BULLETINSALL TECHNICAL SERVICE BULLETINSTRACTION CONTROL INDICATOR ON, DTC 73 SET
1996 Cadillac Eldorado V8-4.6L VIN 9
Traction Control Indicator ON, DTC 73 Set
1996 Cadillac Eldorado V8-4.6L VIN 9SECTION Traction Control Indicator ON, DTC 73 Set
File In Section: 5 - Brakes
Bulletin No.: 63-50-16
Date: May, 1996
Subject:
Traction Control Indicator "ON", Diagnostic Trouble Code (DTC) 73 Set (Replace EBTCM)
Models:
1996 Cadillac Concours, DeVille, Eldorado Seville Built Prior to VIN Breakpoints:
Model VIN Breakpoint
Concours/DeVille 280478
Eldorado 614516
Seville 826978
Condition
Some owners may comment on the Traction Control Indicator coming "ON". Also, Diagnostic Trouble Code (DTC) 73 may set.
Cause
An EBTCM software deficiency may cause a false DTC 73 to set when certain driver initiated actions occur in the normal operation of the vehicle. This may occur if the ignition switch is "parked" between the RUN and OFF positions or on console blower equipped vehicles if the blower speed control is left in the HIGH position when the ignition is turned OFF.
Important:
It is not always possible to create the code or cause the telltale to light.
Correction
1. Determine the DTC 73 is not set because of a legitimate malfunction in the vehicle. Perform the diagnostic steps outlined for DTC 73 in Section 5E2 of the 1996 Cadillac Product Service Information Manual. Also refer to DTC 73 Diagnostic Aids in Section 5E2.
Important:
Do not change the EBTCM until you have read through and followed the Service Manual trouble tree and Diagnostic Aid. Changing the EBTCM before following the proper diagnosis could lead to unnecessary time and expense and may not correct the condition.
2. If the diagnostic trouble tree and aid does not correct the condition, check the EBTCM software level using a scan tool or on-board parameters: "TCS Data Parameter TC D07, ECU ID B". If the parameter reads "4065", replace the EBTCM with P/N 25633191. The new module will have a parameter value of "4205".
Important:
Any vehicle built after the above breakpoints will already have the updated EBTCM. The part number has not changed; however, the software has been upgraded.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use:
Labor Operation Labor Time
H2505 Use published labor
operation time.
Bulletin No.: 63-50-16
Date: May, 1996
Subject:
Traction Control Indicator "ON", Diagnostic Trouble Code (DTC) 73 Set (Replace EBTCM)
Models:
1996 Cadillac Concours, DeVille, Eldorado Seville Built Prior to VIN Breakpoints:
Model VIN Breakpoint
Concours/DeVille 280478
Eldorado 614516
Seville 826978
Condition
Some owners may comment on the Traction Control Indicator coming "ON". Also, Diagnostic Trouble Code (DTC) 73 may set.
Cause
An EBTCM software deficiency may cause a false DTC 73 to set when certain driver initiated actions occur in the normal operation of the vehicle. This may occur if the ignition switch is "parked" between the RUN and OFF positions or on console blower equipped vehicles if the blower speed control is left in the HIGH position when the ignition is turned OFF.
Important:
It is not always possible to create the code or cause the telltale to light.
Correction
1. Determine the DTC 73 is not set because of a legitimate malfunction in the vehicle. Perform the diagnostic steps outlined for DTC 73 in Section 5E2 of the 1996 Cadillac Product Service Information Manual. Also refer to DTC 73 Diagnostic Aids in Section 5E2.
Important:
Do not change the EBTCM until you have read through and followed the Service Manual trouble tree and Diagnostic Aid. Changing the EBTCM before following the proper diagnosis could lead to unnecessary time and expense and may not correct the condition.
2. If the diagnostic trouble tree and aid does not correct the condition, check the EBTCM software level using a scan tool or on-board parameters: "TCS Data Parameter TC D07, ECU ID B". If the parameter reads "4065", replace the EBTCM with P/N 25633191. The new module will have a parameter value of "4205".
Important:
Any vehicle built after the above breakpoints will already have the updated EBTCM. The part number has not changed; however, the software has been upgraded.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use:
Labor Operation Labor Time
H2505 Use published labor
operation time.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.