Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC1996ELDORADO V8-4.6L VIN 9REPAIR AND DIAGNOSISMAINTENANCEALIGNMENTSERVICE AND REPAIRREAR WHEEL ALIGNMENTREAR TOE ADJUSTMENT
1996 Cadillac Eldorado V8-4.6L VIN 9
Rear Toe Adjustment
1996 Cadillac Eldorado V8-4.6L VIN 9SECTION Rear Toe Adjustment
1. Loosen inner toe link bolts.
ADJUST
2. Insert a screw driver or pry bar between the inside rear toe link mounting bolt and the rear support assembly Move the toe link to change toe, and set to specification.
TIGHTEN
3. Toe link mounting bolt to 90 N.m (66 lb. ft.).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.