Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC1996ELDORADO V8-4.6L VIN 9REPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGCOMPRESSOR HVACSPECIFICATIONSA/C COMPRESSOR TORQUE SPECIFICATIONS
1996 Cadillac Eldorado V8-4.6L VIN 9
A/C Compressor Torque Specifications
1996 Cadillac Eldorado V8-4.6L VIN 9SECTION A/C Compressor Torque Specifications
| Rear Bracket Nuts | 23 Foot Pound-Force (ft.lb) |
| Front Bracket Bolts | 24 Foot Pound-Force (ft.lb) |
| Rear Mounting Bolts | 18 Foot Pound-Force (ft.lb) |
| Compressor Line Fitting Bolt | 24 Foot Pound-Force (ft.lb) |
| A/C Module Cover Retaining Screws | 27 Inch Pound-Force (in.lb) |
| Accumulator Retention Bolt | 35 Inch Pound-Force (in.lb) |
| ECC Duct Assembly Retaining Screws | 18 Inch Pound-Force (in.lb) |
| I/P Trim Panel Retaining Screws | 18 Inch Pound-Force (in.lb) |
| Air Inlet Retaining Screws | 44 Inch Pound-Force (in.lb) |
| Condenser Mounting Brackets | 106 Inch Pound-Force (in.lb) |
| Outside Temperature Sensor Mounting Screws | 18 Inch Pound-Force (in.lb) |
| Vacuum Tank Mounting Screws | 53 Inch Pound-Force (in.lb) |
| Tighten all dual O-ring fittings to | 18 Foot Pound-Force (ft.lb) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.