Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC1996ELDORADO V8-4.6L VIN 9REPAIR AND DIAGNOSISCRUISE CONTROLCRUISE CONTROL SERVO CABLEADJUSTMENTS
1996 Cadillac Eldorado V8-4.6L VIN 9
Cruise Control Servo Cable: Adjustments
1996 Cadillac Eldorado V8-4.6L VIN 9SECTION Adjustments
Fig. 1 TV Cable Adjustment.:
A cable is used in this system. The servo unit positions the throttle linkage through the use of a cable. To adjust this cable turn engine to the Off position. Retract idle speed control (ISC) motor plunger. Throttle lever must not touch ISC plunger. Connect cruise control cable to servo hole blade, Fig. 1 , that allows minimum slack.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.